220V 150W BLDC Motor Controller for Air Cooler

Product ID	HFC---LF220P150S1400
Certification	ISO9001, CE, Patent certificate
Motor Parameter Specification:
Voltage(V)	220VAC
Rated Power(W)	150
Output Current(A)	0.7
Rated Speed(RPM)	100~1400
Control Mode	FOC position-less control
Working Duty	S1

SEND INQUIRY

You can make an inquiry about this product.
Your e-mail will not be leaked.

PRODUCT DETAIL

Detailed information:

Product ID	HFC—LF220P150S1400
Certification	ISO9001, CE, Patent certificate
Motor Parameter Specification:
Voltage(V)	220VAC
Rated Power(W)	150
Output Current(A)	0.7
Rated Speed(RPM)	100~1400
Control Mode	FOC position-less control
Working Duty	S1

Product Description:

Our solution HFC—LF220P150S1400 is BLDC motor with high performance controller for air cooler application and already are being shipped in large quantities. The magnet type is neodymium iron boron which has high performance than Ferrite magnets.The wire used 100% copper. With all protections such as voltage protection and so on. The voltage range is from 180vac to 255vac. The speed of the aircooler can be adjusted by knob such as 1400rpm, 1250rpm, 1000rpm, 900rpm, 700rpm and so on.

All the PCBA will be tested in the production line with matched toolings before sending to customers, below is the test video:

Air Coolers Product Features

1. We can customize the air cooler motor, stator, rotor and controller according to the customer’s requirements

2. Our air cooler products balance the cost，at the same time use the best performance of the magnet that greatly improve the efficiency of the air cooler, up to 82%. Ensuring the consistency of the motor, ground insulation and other performance to reach a very good level. Meanwhile provide a matching controller to solve a BLDC motor and controller one-stop solution, save customer matching process and reduce the customer complaint.

3. We can supply: